Tips to Eliminate Scratches on The Glass Helmet
The new helmet feels comfortable when worn compared with a helmet that has long been used. Besides helmets were dirty and smelly, the other problem on the helmet which often results in uncomfortable was visor there are scratches.
 |
| Glass Helmet Image source : www.flickr.com |
Etched glass helmet which resulted in the view becomes less obvious and often the cause is not the focus when riding a motorcycle. If you have experienced this, do not immediately replace it with a new visor, because the tips below will give you the knowledge of how to eliminate scratches on the glass helmet without replacing them with new ones.
Cause scratch visor that is often found is due to dirt. When we ride a motorcycle on rainy conditions, visor will wet with rain water and dirt often in the form of small mud splattered on the glass helmets of the tires of other vehicles that are in front of us. If not immediately cleaned up, when the rain had stopped the dirt on the glass helmet will rapidly dry up because of the wind. And when we have reached our destination quickly as possible to clean with a clean cloth or paper towel. In part this is usually the glass will easily scratched because the mud was sticking to contain substances that rough.
When we try to give a little water to moisten the cloth, and glass helmet began to be cleaned, the dirt and dust will be attached to the surface of the glass.
Dirt and dust will scratch the visor because the shuffle of cloth. This will cause fine scratches on the surface of the glass helmet. So that would make helmet glass refracts when the light hit the vehicle in front of the eyes will be dazzled result.
There are ways to remove scratches on the glass helmet. Here are the tips or ways that arguably the most secure.
1. Prepare a fine sandpaper, shampoo or liquid soap, fine fabrics, and fluid polished or white rubber compound.
2. Lepaslah visor for easy when cleaning. Wash the glass helmet with soapy water so that the dirt more quickly separated.
3. Clean dirt on the surface of the glass by hand and soap mixed with sandpaper visor slowly.
4. Do it carefully, do not forget to make sure the water with soap continues to wet the glass helmet.
5. To test whether resistant helmet sanded glass, start from the very edge of the side glass, do it gradually.
6. The next step, clean the glass opaque at the helm. Clean the glass using a dull white helmet rubber compound. Suggested use a soft cloth that does not add etched glass.
7. Apply the compound on the glass, then wipe until no more white-white in glass helmet. For more leverage, do repeatedly until the scratch completely disappeared.
Good luck.
Tips to Remove Rust on Exhaust Motorcycle
Exhaust is one of the motorcycle parts related to final disposal of combustion gases from the engine. Because it served as a sewer gases of combustion, exhaust certainly often in very hot conditions. Well although its role is vital, part of the exhaust is susceptible to rust and decay. Rust that is left attached either on the neck or on the exhaust pipe exhaust will eventually lead to loss at the wall exhaust. If it is porous, easily arise will eventually exhaust hole in the wall.
 |
| Neck motorcycle exhaust rusty Images source : Google Image |
Well, if it had a leak in the wall of the exhaust gas flow into non-current discharge and consequently your motorcycle to become less powerful. In addition, it also causes the hollow exhaust muffler sounds become distorted. Therefore, you'll want to know how to remove rust on the exhaust motorcycle before rust on motorcycle exhaust you be getting worse.
What are the causes of motorcycle exhaust you become rusty? The most common cause is because the exhaust rarely cleaned of dust and dirt that accumulate and eventually cause the crust and rust. Rust on the exhaust also often arise because you often let the water dry wet exhaust itself.
rust on a motorcycle with ease.
Here are some tips for you on how to easily remove rust on motorcycle exhaust.
1. Using Used Oil. This method is the most convenient and frequently used. Oil can withstand hot temperatures caused the engine combustion process so that you can stay cool exhaust. The way is input only used oil to taste on your exhaust vent. When the exhaust temperature rises, there will be smoke from the exhaust vent, this is reasonable and will return to normal after some time.
2. If there is rust on the exhaust outside. If rust appears on the exhaust outside, using used oil, you can apply it evenly on the motorcycle exhaust that has begun to look rusty. For example on the neck or on the exhaust pipe exhaust. Turn on the motorcycle and let a few minutes until the temperature of the exhaust to heat. The oil that has been applied to the exhaust will react and melt rust attached to the exhaust.
3. Using ceramic cleaners. This method is also quite easy. ie by pouring enough cleaning fluid in a container of the ceramics, then apply evenly on the exhaust begins to erode, wait a few moments. Take an old toothbrush and rub gently until the rust disappears.
4. Using Toothpaste. This method is suitable specifically made to remove rust on the exhaust that has been coated with chrome. Indeed, rust can appear anywhere, including the chrome layer. It's easy, apply toothpaste moderation on the part rusty exhaust. wait a while, then use a washcloth to rub the rust and dirt lifted. Repeat several times for cleaner results.
Similarly, some of the ways to eliminate rust on motorcycle exhaust, may be useful.
Tips Restore Scratches on Car Paint
For those of you who have cars, scratches on the car's exterior paint is of course very disturbing beauty of your car. scratches on the paint can be caused by many things, namely the deliberate scratches by the hands of ignorant, exposed gravel, hit the branches or twigs or scratches can also occur because of rough cloth.
 |
| Images source : Google Images |
If you do not know how to eliminate scratches on the car's exterior, you may bring your car to a repair shop car painting. It removes scratches was not easy, but if we know how to remove the scratches, then you can do it yourself at home.
If you want to know how great way to eliminate scratches on the paint of your car, consider the following review carefully. Before we start you may need to know in advance the types of scratches on car paint, scratches Because of different types will, of course, be different to remove the scratches.
1. Scratches light. ie scratches that do not hurt the paint composition. For example scratches on the car, paint caused because the affected nails or exposed layer of the cloth a little rough. How to eliminate scratches on the car body like this simply by using a polishing products (wax, compound, swril remover, and scratch remover) is applied or sprayed on a soft textured fabric (can use microfiber cloth), then repeatedly rubbing the car body area being scratched. After that perfected by spraying liquid paint surface polish that car back clean and radiant.
2. Scratches being. ie scratches that had reached the base paint. Usually occurs because of the meddling hands, scratched wire, a branch or branches. How to eliminate scratches on the car paint that is by first cleaning the surface are etched using a grease remover and wax. After that, you can do repainting the car body you were scratched.
3. Scratches in. the type of scratches that have penetrated the base coat of paint and the metal car body. Usually, there is no other way than to paint it back. How to eliminate scratches on the car body in this type of scratches is to mengamplasnya several times and spray paint cars that are mixed with quality thinner. If you are having trouble, please do not hesitate to immediately go to the nearest car paint repair shop in your area.
After knowing the types of scratches on the car, the next step is to figure out how to eliminate it. The way is as follows:
1. Clean the exterior of the car right on the part contained scratches, point to remove dust and dirt on the car body paint. Cleaning in this section may use water or with a cloth-textured smooth and clean.
2. If washed with water, dried parts are etched using a cloth made from chamois to dry completely.
3. Apply a paint remover products scratches on the car. Use products that are known for having a good quality. The product disappeared scratches on car body paint to disguise scratches on your car. You can also use a compound. Use only as needed compound, the compound functions can disguise scratches on the surface of the paint to the workings of your car scrape the paint layer. Therefore, if you are too much use of the compound, then a layer of paint of your car will be even thinner.
4. Apply a scratch remover product or compound by using a soft-textured cloth. Make sure the cloth is clean and makes sure there is no sharp sand or hard particles existing in the duster. This is to avoid the emergence of new scratches on the paint of your car.
5. If the scratches have started obscured and lost, you can proceed to the finishing stage, ie applying a liquid or gel paint polishing the car to the side of the car body re-glazed. But if it still looks a little scratch marks, you can repeat the steps with a back rub or scratch remover product compound until the scratch completely disappeared.
Good luck.
Tire Quickly Exhausted? So How To Prevent It
A tire is a vehicle component that is quite important, but sometimes not very noticed its existence. In fact, sometimes we use the vehicle is not in accordance with procedures which make tires quickly become thin.
 |
| Images Source : Google image |
Along with the application, the tire is going to be reduced thickness, but with the use of a good and appropriate procedures tires thinning process can be slowed. As a comparison, the age of motorcycle tires front could reach two years, while the rear tire can reach 1 year. Age is the age standard for normal use.
If you feel the tires you use fast depleting, there needs to be an analysis of what the cause. Driving is not a good process also contribute to accelerating the process of the thin tires. Here are a few tricks that maybe you can use the drive so that the tire can be more durable and not easily thin.
1. Use the right air pressure. Do not use air pressure is too harsh because it would cause inconvenience in driving. While the air pressure is too weak will cause rapid tire thin, because too much of the tire tread on the road.
2. Minimize or reduce the load of the vehicle. Increasingly heavy vehicle load, the faster the tire to be thin, because the tires become extra hard in supporting the vehicle.
3. Avoid roads that contain lots of oil spills. Sometimes there are some parts of the road are exposed to oil spills, as much as possible to avoid lest you tire passes the oil, because it will make the tire easier to erode, because the tires are exposed to oil would be more lenient.
4. Use the brakes naturally and slowly. Do not use the brakes suddenly, especially until the tire stops but still drove the vehicle which caused friction between the tire with the road. If this is the case then surely your vehicle tires will quickly thin.
5. Avoid uneven roads, rocky or pebble. In addition to discomfort, type of road is also a spur to more quickly make the tire be thin.
Hope it is useful.
How Long Does the Use of Car Tires?
The tire is one of the important components in a car because it is the part that supports the car as a whole. Therefore, it can be said tire work heaviest components because direct contact with the asphalt and moving all the parts of the car.
 |
| Images Source : Google Image |
It also has a car tire service life. The longer used, tires diminishing its quality, therefore it is important to know how long the life of the tires on the car fit for use?
Age tires generally be seen from two indicators, namely long distance tire wear and tire usage. viewed from a distance usage, maximum tire life of 40,000 kilometers. While the views from the use of a maximum of 3 years old. If the tire has reached the user for 3 years while the distance yet to 40,000 kilometers, the tires will show unfit for use.
Other indicators that can be used is the technology Tread Wear Indicators (TWI) which functions show the limits of tire usage in the form of a triangular symbol side of the tire or shaped bulge on the sidelines of the tire pattern. The function of the TWI is an indicator that the tire is not feasible to use, though not until 3 years old.
So that the tire has a maximum age, the act of taking care of the tires is a must. The air temperature in the tire affects the least durable and tires. tires should not be used at temperatures that are too hot, the tires will wear faster and cracks in hot temperatures. Therefore, always keep the tire temperatures. Ideally, the tires worked continuously for 3 to 4 hours. If it is to limit the travel time, rest your car to lower the temperature in the tire. Besides, it also gives you time to rest for 20 to 30 minutes.
The tires are filled with nitrogen also affect the life of the tire than ordinary air, therefore the use of nitrogen in tires are strongly advised to preserve the life of the tire.
Subscribe to:
Posts (Atom)
